Action:

1) Turn off the computer and disconnect the power cable.
2) Disconnect the old printer cable:

a) Go to the rear of the printer and disconnect connector clips or screws from the data cable running to the computer. Note the type and location of the connector.
b) Trace this cable to the back of the computer and unscrew the connector screws and carefully remove the printer cable.

3) Connect the new printer cable:

a) Attach a new printer cable to the same port from which the old one was removed on the back of the computer.
NOTE: The cable can only be attached one way. Secure the connector screws.
b) Carry the other end of this cable to the rear of the printer, and connect it to the same port where the old one was removed.
NOTE: The cable can only be attached one way. Secure the connector clips or screws.
WARNING: DO NOT force the connection. The pins and/or the connector may become damaged.

4) Turn on the power to the computer and printer.
5) Open the application and reprint the document.

Question:

Responses: